Ion bonding gun finish6/12/2023 To simplify dispensing and reduce the possibility of errors, use Entropy Pumps to meter the correct ratio of resin to hardener. Resin and hardener dispensed at the wrong ratio is the source of most cure-related problems. An accurate ratio is essential for epoxy to fully cure and develop its physical properties. Do not attempt to adjust the epoxy cure time by altering the mix ratio. Don’t use glass or foam containers because of the danger of exothermic heat buildup. Dispensing Resin and hardenerĭispense the correct proportions of resin and hardener into a clean plastic, metal, or wax-free paper container. It’s also a good idea to review epoxy safety protocols. Mix small batches until you’re confident of the mixture’s handling characteristics, and because epoxy kicks off faster in larger, contained batches. This way, you’ll get a good understanding of the epoxy’s open (or workable) time for the temperature you’re working in, and ensure that you’re properly metering the resin and hardener ratio. If this is your first time using an Entropy Resins epoxy product, begin with a small test batch to get a feel for the mixing and curing process before applying epoxy to your project. Whether you’re applying the epoxy mixture to wet out fiberglass, as a coating or a casting, the following steps will ensure a controlled and thorough chemical transition to a high-strength epoxy solid. Check the hardener label or the technical data sheet for the correct mix ratio of resin to hardener. We can take credit card payments over the phone for a 3% charge to recoup the credit card processing fee.Dispensing, Measuring & Mixing Epoxy Resin and HardenerĬareful measuring and thorough mixing of epoxy resin and hardener are essential for epoxy to cure properly. Please include a Check or Money Order for the full amount including return shipping. Please also include your complete contact information including Name, Address, Phone Number and email address. IONBOND orders should be sent to us at the address below with a packing list of parts included. Call or email if you have any questions.Ĭolors currently being offered are Black, FDE, Gray and Silver. That cost will be the actual cost incurred. If a frame or complete gun needs to be shipped to an individual, the law requires Air shipping by common carrier i.e: UPS or Fedex. Return shipping is $10.95 for small parts orders or $25.00 for complete guns going to an FFL Licensee. Pricing for non-pistol parts available upon request. Small parts would include but not limited to: Safety, Slide Stops, Mag Catch, Extractors, Hammers, Pins, Barrel Bushings, Firing Pin Stops, etc. Please Note: Coating may not be able to be applied to metal that has been chromed, nitrided, or any other finish that requires a chemical strip. Can be applied over a high polish finish No appreciable build-up to interfere with firearm operation Lubricious, corrosion, and chemical resistant We recommend you keep the coated parts oiled to prevent corrosion. This provides excellent abrasion resistance and a lowered coefficient of friction, which results in less resistance and heat buildup. The average micro hardness of PVD coatings are over 80 on the Rockwell hardness scale, yet does not effect the characteristics of the steel underneath. This makes PVD coatings perfect for application to both firearms and firearm components. The micronized nature of our PVD coatings ensures there are no perceivable layers of thickness added to the medium it is being applied to. Physical Vapor Deposition is a process used to provide hardness and abrasion resistance to machine parts and cutting tools in order to achieve maximum efficiency. If you are looking for a high performance coating for your firearm that is durable and looks fantastic, then look no further than one of Evolution Armory's beautiful PVD selections.
0 Comments
Leave a Reply. |